I. Product Features
Made of rubber or resin mixed absorbent, the thickness can be adjusted, flexible, elastic, good strength, can be cut into any shape.
Ii. Application scope
1. Reduce electromagnetic noise of electronic equipment (especially mobile equipment)
2. Internal electromagnetic interference and resonance reduction (installed in the shielding box)
3. RF block, amplifier
4. Radiation noise reduction (circuit, integrated circuit, flat cable)
5. Near the radar antenna
3. Usage
Adhesive or self-adhesive back adhesive bonding. Before use, the
bonding surface should be cleaned with alcohol or organic solvent to ensure no oil and dust. When using, it must be tightly attached to the substrate.
IV. Notes
1. The use and storage temperature should not exceed the working temperature of the  product ℃ , where FX series-55~+85℃ , GX series-55℃ ~+200℃ , RX series-55℃ ~+85℃;
2. Do not wipe the product with organic solvent.